Option # 1
Supplied kit: $ 16 440
Components are supplied in kit form ready for assembly. The kit option is the most economical way of racing in a brand new hi-tech pre preg Carbon Skiff. Purchasing a kit saves time and hassle while ensuring the best possible construction.
Inclusions:
- Hull construction - Uni directional pre preg carbon fibre, Nomex core laminated in female mould, vacuum bagged and cooked at 85 celsius
· Deck construction– uni directional pre preg carbon fibre, Nomex core laminated in a female mould, vacuum bagged and cooked at 85 celsius
· Integrated mounts for self tacking jib track
· Integrated Mast step pad
· Deck reinforcement - Pre preg Kevlar
· Fwd Tank top for spinnaker chute set up. Construction- Uni directional pre preg carbon fibre, Nomex core laminated in a female mould vacuum bagged and cooked at 85 celcius.
· Frames supplied as a Carbon fibre panel. Carbon / epoxy foam sandwich laminate vacuum bagged and post cured in oven. Comes with peel ply finish for improved secondary bonding.
· Centerboard case – Carbon epoxy construction
· C- Plate – Vacuum laminated Epoxy Carbon/ Kevlar composite Solid plate. Used for solids and fitting reinforcements. ½ sqm
Extras
- Carbon rudder gudgeon's $92 each
· Rudder Post- Supplied Clear carbon epoxy rudder post $363
Option #2
Installed kit: $18950
All components are supplied as per option #1 (supplied kit) with the following components installed ready for deck bonding:
- Hull with cockpit grid frame installed
· Front tank installed
· Centerboard case installed
· Transom installed
· Rear and front bulkheads Installed for buoyancy tank compartments
· Carbon mast post
Does not include-
Chain plates, bowsprit, solid bobstay or bobstay attachment, whisker pole sockets or whisker stay attachment points, rudder gudgeons, rudder post or carbon tubes, solids for fittings.
Extras
- · Composite chain plates- quick pin system $394
· Lower Composite Carbon rudder gudgeon $100
Option # 3
Hi build 16ft skiff hull
Bonded Hull & Deck: $21 090
Includes carbon frames and internal structure, carbon center board case, carbon bowsprit, Solid foil shaped bobstay, composite carbon forestay attachment and carbon pre preg self- tacking jib track mounts.
Spinnaker Chute configuration $1870 extra
Extras for Bonded Hull & Deck:
|
Item |
Description |
Price |
|
Composite chain plates |
Carbon / Kevlar chainplates with stain less ¼ “ quick pin |
$394 |
|
Whisker pole sockets |
Moulded whisker pole sockets with additional deck reinforcing. |
$275 |
|
Whisker stay attachment points |
Composite whisker stay attachment points integrated into hull/deck |
$284 |
|
Kevlar Cockpit reinforcing |
Additional Pre preg Kevlar laminated in Cockpit area for improved impact resistance |
$750 |
|
Tack line tube |
Through foredeck tube for spinnaker tack line |
$220 |
|
Composite Solids |
Installed composite carbon/ Kevlar plate for solids and fitting reinforcements |
$ 52 (per fitting) |
|
Rudder frame installation |
Installed clear carbon stern post. Composite Carbon/Kevlar rudder gudgeons and Carbon transom tube. |
$1167 |
|
Undercoat |
Hi- build epoxy primer (400 grit finish) |
$990 |
Paint : $2500
One color sprayed in Altex elite pro spray 2 pack polyurethane paint.
Foils
Carbon epoxy rudder (includes tiller) $1650 (inc GST)
Carbon epoxy centerboard $1650 (inc GST)
Please Note : Other construction options are available on request.
All boats are built to order. Construction time for a bare hull is 5 weeks and delivery is 6 weeks to 6 months depending on work load.
Prices are subject to vary with out notification. Please contact us for a formal quotation and specifications. Emai